Modeling of the Modulus of Elasticity of the Cement-Based Composite within Internal Curing

Kravchenko V.

ABSTRACT

In this paper presents proposed model for predicting the modulus of elasticity of cement composite systems with low water/cement ratio within internal curing using presoaked lightweight aggregates are considered. The proposed model based is the separation of the microstructure composite into elementary heterogeneous levels, on each of which is determined aging elasticity, using methods of homogenization of the effective medium theory and the differential effective medium theory. The separation cement-based composite into elementary heterogeneous levels are representation in the multiscale scheme The presoaked lightweight aggregates contained in the cement-based composite is separated into a particular heterogeneous level, which makes possible to determine effective elastic modulus for different composite, for example, composite including cement paste and lightweight aggregate only. The elastic modulus of cement-based composite is significantly influenced by the varying size of the aggregate and the characteristics of the interfacial transition zone, however, the existing methods of homogenization, as a rule, do not fully take into account these parameters. For determine the effective elastic modulus of cement based composite, a step by step method are proposed based on the new differential effective medium theory. The proposed method predicts with high accuracy of the effective elastic modulus with take into account both the varying size of the aggregate and the characteristics of the interfacial transition zone. Also presented the results of verification of the proposed model.

Keywords: cement paste, concrete, multiscale scheme, cement hydration, percolation threshold.

For citation: Kravchenko V. Modeling of the Modulus of Elasticity of the Cement-Based Composite within Internal Curing. In: Contemporary Issues of Concrete and Reinforced Concrete: Collected Research Papers. Minsk. Institute BelNIIS. Vol. 9. 2017. pp. 250–278. https://doi.org/10.23746/2017-9-16

Full text in Russian:



References:

  1. Kovler K., Jensen O. M. Internal Curing of Concrete. State-ofthe-Art Report. RILEM Publications. 2007. 161 p.
  2. Tennis P. D., Jennings H. M. A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes. Cement and Concrete Research. 2000. No. 30(6). pp. 855–863.
  3. Bernard, O., Ulm, F. J., Lemarchand E. A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials. Cement and Concrete Research. 2003. No. 33(9). pp. 1293–1309.
  4. Ulm, F-J., G. Constantinides F., Heukamp H. Is concrete a poromechanics materials? – A multiscale investigation of poroelastic properties. Materials and Structures. 2004. No. 37(1). pp. 43–58.
  5. Acker P. Micromechanical Analysis of Creep and Shrinkage Mechanisms. Procedings International Conference on Creep, Shrinkage and Durability Mechanics of Concrete and other Quasi-Brittle Materials. 2001. pp. 15–25.
  6. Velez K., Maximiliena S., Damidot D., Fantozzi G., Sorrentino F. Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker. Cement and Concrete Research. 2001. No. 31(4). pp. 555–561.
  7. Bentz D. A Three-Dimensional Cement Hydration and Microstructure Development Modelling Package. Internal Report. National Institute of Standards and Technology. 2005. 226 p.
  8. Hussain A., Mehmood S., Rasool M. N., Aryal S., Rulis P., Ching W. Y. Electronic structure, mechanical, and optical properties of CaO·Al2O3 system: a first principles approach. Indian Journal of Physics. 2016. No. 90(8). pp. 917–929.
  9. Hajilar S. Nano-Scale Investigation of Mechanical Characteristics of Main Phases of Hydrated Cement Paste. Dissertation thesis. University of Massachusetts. 2015. 127 p.
  10. Manzano H. Atomistic Simulation studies of the Cement Paste Components. Dissertation thesis. Universidad del País Vasco. 2009. 230 p.
  11. Vandamme M. Ulm F. J., Fonollosab P. Nanogranular packing of C–S–H at substochiometric conditions. Cement and Concrete Research. 2010. No. 40(1). pp. 14–26.
  12. Němeček J., Šmilauer V., Kopecký L. Nanoindentation characteristics of alkali-activated aluminosilicate materials. Cement and Concrete Composites. 2011. No. 33(2). pp. 163–170.
  13. Hu C., Zongjin L. Property investigation of individual phases in cementitious composites containing silica fume and fly ash. Cement and Concrete Composites. 2015. No. 57. pp. 17–26.
  14. Kim J., Fan T., Taha M. Homogenization Model Examining the Effect of Nanosilica on Concrete Strength and Stiffness. Journal of the Transportation Research Board. 2010. No. 2141. pp. 28–35.
  15. Filimonova N. V. Modelirovanie struktury i sobstvennyh deformatsiy rasshiryayu shchihsya sulfoalyuminatnyh tsementnyh system [Modeling of the structure and deformations of expansive sulphoaluminous cement systems]. Dissertation thesis. Brest State Technical University. 2006. 223 p. (rus)
  16. Papadakis V. G. Experimental investigation and theoretical modeling of silica fume activity in concrete. Cement and Concrete Research. 1999. No. 29(1). pp. 79–86.
  17. Parrot L. J., Killoh D. C. Prediction of cement hydration. British ceramic proceedings. 1984. No. 35. pp. 41–53.
  18. Lothenbach B., Saout G., Gallucci E., Scrivener K. Influence of limestone on the hydration of Portland cements. Cement and Concrete Research. 2008. No. 38(6). pp. 848–860.
  19. Ukrainczyk N. Kinetic modeling of calcium aluminate cement hydration. Chemical Engineering Science. 2010. No. 65(20). pp. 5605–5614.
  20. Tazawa E., Miyazawa S. Prediction Model for Autogenous shrinkage of concrete with different type of cement. Procedings 4th International Seminar on Self-Desiccation and Its Importance in Concrete Technology. 2005. pp. 125–139.
  21. Rostasy F.S., Gutsch A., Laube M. Creep and relaxation of concrete at early ages – experiments and mathematical modeling. Procedings 5th International RILEM Symposium. 1993. pp. 453–458.
  22. Lee H. K., Lee K. M., Kimy B. G. Autogenous shrinkage of high-performance concrete containing fly ash. Magazine of Concrete Research. 2003. No. 55(6). pp. 507–515.
  23. Coussy O. Poromechanics. Chichester: John Wiley & Sons. 2004. 312 p.
  24. Maekawa K., Ishida T., Kishi T. Multi-Scale Modeling of Structural Concrete. New York, London: CRC Press. 2008. 658 p.
  25. Garboczi E. J., Berryman J. G. Elastic moduli of a material containing composite inclusions: Effective medium theory and finite element computations. Mechanics of Materials. 2001. No. 33(8). pp. 455–470.
  26. Jones W. A., House M. W., Weiss W. J. Internal curing of high performance concrete using lightweight aggregates and other techniques. Technical Report. Purdue University. 2014. 129 p.
  27. Yoshitake I., Rajabipour F., Mimura Y., Scanlon A. A Prediction Method of Tensile Young’s Modulus of Concrete at Early Age. Advances in Civil Engineering. 2012. No. 2012. pp. 1–10.
  28. Youssef D. The use of lightweight sand for internal curing and its effect on performance of HPC used for concrete infrastructures. Dissertation thesis. Université de Sherbrooke. 2013. p. 110.
  29. Bogue R. H. Calculation of the Compounds in Portland Cement. Industrial & Engineering Chemistry Analytical Edition. 1929. No. 1(4). pp. 192–197.


ISSN 2076-6033
Мы используем куки
При использовании данного сайта, вы подтверждаете свое согласие на использование файлов cookie. Если вы не согласны с тем, что на сайте используется данный тип файлов, то вы должны соответствующим образом установить настройки вашего браузера или не использовать сайт